Mountain ebike E1607

Product introduction

Even though this e-bike doesn’t come with integrated lights, the tires are reflective for increased visual footprint, they can be deflated to 55 PSI to increase comfort and pair nicely with the ergonomic grips… consider swapping the seat post with a 31.6 mm suspension post if you frequent bumpy roads and trails but keep in mind that it will raise the minimum saddle height by a few inches


Battery weight is kept low and a bit forward to balance out the hub motor, the bike handles well and power is exerted in a way that doesn’t interfere with the drivetrain and wear the chain, sprockets, or derailleur as quickly (like some mid-drive motors do)

Product Details

Frame:Aluminum alloy
Brakes:Hydraulic Disc Brake
Derailleur:Shimano 27 Speeds
Front fork:Suspension
Max speed:25Km/h
Battery:36V; 10.4 Ah
Motor:Rear Drive
Motor rated power:250W
Motor rated voltage:36V

Product Application

The battery capacity is above average so you’ll go further on each charge, it’s a 36 Volt system which transfers energy more efficiently… this is all good considering that hub motors tend to be less efficient with the ever more prominent mid-drive motors

Not only are most of the wires internally routed through the frame (creating a nice look and reducing snags) but the connection points are threaded and sealed with rubber washers to protect from water, there are even some extra wire-management bands on the handle bar to keep wire clutter down

Product picture

Mountain ebike E1607

Product Advantages

High density of energy
Light weight
Low self-discharge
Low internal resistance
Long cycle life, chargeable up to 1000 times
No memory effect
Doesn’t contain Mercury, No fire, No explosion, No leakage
Environmental friendly

Product Transport

After receiving the order, we will choose the corresponding products for packaging, and then choose a reasonable mode of transportation for delivery.
The specific time is determined by the destination.


    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Post comment